AIO-3310類比控制卡

Applications

Analog signal measurement for physical signal of temperature, voltage, current, flow, light......etc

Digital i/o control of switch input, relay control, trigger output

Counter / Timer for event counting, periodic interrupt source, PWM generator(can work as D/A with external low  pass filter),

     counter / timer with  trigger out, duration counter

Features

 8 channel 12-bit analog inputs(standard : 8 channels)

 Software selectable input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V

 Factory pre-calibrated analog conversion accuracy

 2 byte-wide programmable TTL I/O

 DIO00, DIO01 as trigger / counter in, DIO10, DIO11 as trigger out of timer / counter function

 2 32-bit multifunction counters up to 8MHz

 Multi-function : programmable one-shot; square wave generator; event counter; PWM generator

Software key function

Specifications (With Matched Wiring Board)

Main Card -- Analog Input

 Input channel : 8 channels(standard : 8 )

 Input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V

 Input type : single end or differential

 Range selection : software selectable per chip

 Resolution : 12-bit

 Conversion speed : 6us per chip

 Accuracy : full range within 5mV(after calibration)

Main Card -- Digital I/O

 I/O channels : 16 TTL(2 ports)

 Configuration : programmable byte input / output

Main Card -- Timer / Counter

 Channels : 2

 Specific input : trigger in / counter in via digital I/O port0

 Data length : 32-bit

 Specific output : trigger out / counter out via digital I/O port 1

 Time base : 4MHz

 Multi-function : programmable one-shot; square wave generator; event counter; PWM generator

Main Card -- General

 PCI data width : 32-bit

 Security password : 10 bytes, user configurable

 Card ID : 4-bit

 Interrupt : software disable / enable

 Dimension : 154(W)*112(H) mm, 6.06(W)*4.41(H) in

DIN rail mounted wiring board

 Connection cable :